Base Cutter Set

Use the Base Cutters and Roller with Spacers for your Tabletop DIY Terrain, Figures, Buildings and Bases and so on. Use them on Air-Drying Clay, Clays or XPS Foam for example.

Use the "BOTTOM" side to cut out the base or base with texture and the other slightly smaller "TOP" side if you have a base and only want to add a texture on top.

Cutter Sizes:

Round Cutters: 25mm, 28mm, 32mm, 40mm, 50mm, 60mm, 65mm, 100mm.

Oval Cutters: 60x35mm, 75x42mm, 90x52mm, 105x70mm, 120x92mm, 160x100mm, 170x105mm.

Square Cutters: 20mm, 25mm, 32,5mm, 40mm, 50mm.

Rectangle Cutters: 50x25mm, 75x50mm, 100x50mm, 150x50mm, 150x100mm.

Hex Cutters: 25mm, 2x25mm, 3x25mm, 7x25mm, 30mm, 2x30mm, 3x30mm, 7x30mm.

Also included in the "Base Cutter Set". To recreate the exact same and desired thickness again and again with a smooth surface for your bases, use the rollers with spacers. The bigger the spacer, the thicker your Layer for your base will become. If you only create smaller bases you can go with a shorter roller, but if you may create bigger bases then go with one of the longer version. 

Available Rollers lengths: 11.5cm & 22cm

Designed by the talented STL LOOT FACTORY

Please allow for a possible 3-4 day lead time due to printing time of parts.